Enterasys-networks XSR-3020 Manual do Utilizador descarregar pdf (Página 90)

Cable, CompactFlash and Accessory Specifications

A-4

COM (Console) Port

The XSR comes equipped with a COM serial port useful for initial configuration and management.

Using a serial (null modem) cable, you can attach the router’s DB-9 COM port to a data terminal

port and directly configure the XSR over the asynchronous connection. Then, open a

communications or Telnet session to communicate with the router. If you use a communications

program, set the connection properties as follows:

• Connect using: Direct to COMx (where x is an unused COM port)

• Bits per second: 9600

• Data bits: 8

•Parity: None

•Stop bits: 1

• Flow control: none

Refer to Figure A-1 for pinout assignments.

Figure A-1 COM Port Pinouts

Note: The XSR default l login is Admin with no password.

Pin Signal

1 Carrier Detect (CD)

2 Receive Data (RX)

3 Transmit Data (TX)

4 Data Term Ready (DTR)

5 Ground (GND)

6 Data Set Ready (DSR)

7 Request to Send (RTS)

8 Clear to Send (CTS)

9 Ring Indicator (RI)

Pin 1 Pin 5

Pin 6 Pin 9

COM

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 109 110

Sem comentários

Enterasys-networks XSR-3020 Manual do Utilizador Página 90