Enterasys-networks XSR-3020 Manual do Utilizador descarregar pdf (Página 37)

Installing a CompactFlash Memory Card

XSR Getting Started Guide 2-5

Installing a CompactFlash Memory Card

An optional CompactFlash (CF) memory card provides additional non-volatile storage

capabilities in various increments. The CF’s controller interfaces with a host system allowing data

to be written to and read from the CF’s flash memory module. The XSR supports Type I and II

CompactFlash card types. Refer to Figure 2-6 for a generic illustration of the card.

The CF’s memory is large enough to store image files. You can do so simply by using the Bootrom

Monitor mode

copy command. For example, to copy a file from the Onboard flash: directory to the

cflash: directory while in the flash: directory, enter:

XSR>copy <source_name> cflash:<destination_name>

Figure 2-6 Typical CompactFlash Card

CompactFlash Card Installation

Follow the steps below to install the CompactFlash card:

1. If your CF is already formatted, first remove the cover plate as shown in Figure 2-7. If it is not

formatted, jump to “Formatting the CompactFlash Card” on page 2-6.

Figure 2-7 Removing CompactFlash Cover Plate

Pin 50

Pin 1

NIM 1

NIM 2

1000

GBIC

Link

10/100/1000

-3

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 109 110

Sem comentários

Enterasys-networks XSR-3020 Manual do Utilizador Página 37