Enterasys-networks XSR-3020 Manual do Utilizador descarregar pdf (Página 82)

Bootrom Monitor Mode Commands

3-38 Software Configuration

This command formats the Flash file system. We recommend that you first save any .dat,

.cert, .cfg

, and your startup-config files to cflash: or a PC since any files in flash: will be

deleted. You are prompted to enter data by the following script:

XSR-3020: ff

You will lose all files in the “flash:” file system.

Are you sure you want to format the “flash:” file system? (y/n) y

Unlocking flash file sectors

Initializing DOS file system.

Formatting flashrom file system

...................................................... Done.

Set working directory to flash:

Using default Bootrom password. The system is not secure!!!

Use “bp” to change password

ffc

This command formats the CompactFlash card.

This command retrieves a file over the network using a remote IP address/file path.

This command modifies network parameters. You are prompted to enter data by the following

script. While most of the options are self-explanatory, three require further description.

• When set to no, the Autoboot option places the prompt in Bootrom mode when you boot or

power up the XSR.

• When set to yes, the default Quickboot action of delaying five seconds at startup for you to

optionally enter CTRL-C and acquire Bootrom mode is negated. You can still acquire Bootrom

mode, but you must immediately press CTRL-C upon seeing the X-Pedition Security Router

Bootrom header.

• The default hostname (local target name), XSR-3000, cannot be changed. In the absence of a

user-supplied hostname via the

hostname CLI command, this name will be used as the CLI

prompt and SNMP hostname in MIB-II.

XSR-3020: np

Enter ‘.’ = clear a field; ‘-’ = go to previous field; ^C = quit

Local IP address (192.168.1.1) :

Gateway IP address () :

Remote Host IP address (192.168.1.10) :

Remote file path (c:\) :

Use TFTP (no) :

Ftp userid (anonymous) :

Ftp password () :

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 109 110

Sem comentários

Enterasys-networks XSR-3020 Manual do Utilizador Página 82