Enterasys-networks ROAMABOUT RBT-1602 Manual do Utilizador descarregar pdf (Página 45)

Mounting the Antenna

RoamAbout Antenna Site Preparation and Installation Guide 3-13

TomounttheRoamAbout2.4GHzdirectionalantennatoanarrowmast,performthef ollowing

steps:

1. Removethenuts,flatandchannelwashersfromtheopenendoftheU‐bolt.

2. RemovethebracketnearesttotheopenendoftheU‐bolt.

3. InserttheU‐boltaroundthemast.

4. Reversetheorientation

ofthebracketthatyouremovedsothatitisontheU‐boltinthesa me

orientationastheotherbracket.(Thatis,withtheconvexsideofthebracketfacingtheclosed

endoftheU‐boltandtheconcavesideoftheU‐boltfacingtheopen

endoftheU‐bolt.)

5. Replacethenuts,flatandchannelwashersontheendsoftheU‐bolt.

6. Tightenthenutsuntilthebracketsgripthemastsnugly.

7. Turnthetiltangleadjustertotheangleatwhichyouwanttomounttheantenna.

8. Repeatsteps1through7toattachthe

secondU‐boltmounttothemast.

9. ConnecttheantennatothescrewsinthemiddleofthetiltangleadjustersoneachU‐bolt.

10. Aftermountingtheantenna,connecttheantennacablesasdescribedin“Connectingthe

AntennaCables”onpage 3‐34.

Note: Install the channel washer on the notched side of the bracket.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 91 92

Sem comentários

Enterasys-networks ROAMABOUT RBT-1602 Manual do Utilizador Página 45