Enterasys-networks ANG-1000 Manual do Utilizador descarregar pdf (Página 34)

Aurorean Network Gateway-1000 User’s Guide

Chapter 3

Configuring the ANG-1000 with Aurorean Web Config

– Enter the Gateway IP address.

– Specify the Primary DNS IP address.

– Set the Secondary DNS IP address.

– Click Apply.

H Click the PPPoE assigned IP address radio button and perform

the following steps:

– Specify a Username supplied by your cable/DSL provider.

– Enter a Password.

– Type the password again in the Confirm field.

– Click Apply.

3 If you chose the Manual or PPPoE options, a window appears

detailing the reconfiguration changes and prompting you to reboot the

ANG-1000. Click Reboot Now.

After a few moments when an IP address has been received for the external

port, the Internet LED will turn on. If a static IP address was configured, the

Internet LED will shine immediately.

NOTE

If you press the reset button after you have configured your ANG-1000,

you will lose your entire configuration. Any settings you supplied must

then be re-entered. We strongly recommend that you do not use the reset

button unless you want the configuration to return to factory defaults.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 69 70

Sem comentários

Enterasys-networks ANG-1000 Manual do Utilizador Página 34