Enterasys-networks D-Series Manual do Utilizador descarregar pdf (Página 340)

show cos port-config

11-24 Policy Classification Configuration

Defaults

None.

Mode

Switchcommand,read‐write.

Usage

CoSIRLportgroupsareidentifiedbygroupnumberandthetypeofportsinthegroup,inthe

formofgroup#.port‐type. TheIRLportgroup0.0existsbydefault.Thisdefaultportgroupcannot

beremovedandallphysicalportsinthesystemareassignedtoit.Up

tosevenadditionalport

groups(1through7)canbeconfigured.Currently,onlyoneporttype(type0)issupported.This

porttypesupports100limiters.

Additionalportgroupsmaybecreatedforflexibility.Portsassignedtoanewportgroupmustbe

mutuallyexclusivefromtheotherportgroupentries—ports

areautomaticallyremovedfromthe

defaultportgroup—andmustbecomprisedofthesameporttypeasdefinedbytheportgroup.

Thecreationofadditionalportgroupscouldbeusedtocombinesimilarportsbythei rfunctionfor

flexibility.Forinstance,portsassociatedtouserscanbeaddedtoa

portgroupcalled“Users”and

portsassociatedtouplinkportscanbeaddedtoaportgroupcalled“Uplink.”Usingtheseport

groups,asingleclassofservicecanassigndifferentratelimitstoeachportgroup.“User”ports

canbeassignedoneratelimit,while“Uplink”portscanbeassigned

another.DFEsupportsa

maximumof8portgroupsperCoSfunction(IRL).

Thecommandshowcosport‐configdisplayseachIRLportgroupconfiguredbygroupandtype,

withthegroupnameandassociated(assigned)ports.Thecommandshowcosport‐typedisplays

theavailableinboundratelimitingresources

fortheporttype.

Example

Thisexampleconfigurestwoportgroups,oneforuserportsandoneforuplinkportsandassign

portstothegroups.Portgroup1.0willrepresentuserports,group2.0willrepresentuplinkports.

D2(su)->set cos port-config irl 1.0 name Users ports fe.1.1-46

D2(su)->set cos port-config irl 2.0 name Uplink ports fe.1.47-48

show cos port-config

Usethiscommandtoshowinboundratelimitinggroupsandtheassignedports.

Syntax

show cos port-config [irl group-type-index]

Parameters

irl (Optional)Specifiesthatinboundratelimitingconfigurationinformation

shouldbedisplayed.

group‐type‐index (Optional)Showassignedportsforaspecificportgroup.Validentriesare

intheformofgroup#.port‐type.

Validvaluesforgroup#canrangefrom0to7. Validvaluesforport‐type

canrangefrom0

to1,althoughonlyporttype0iscurrentlysupported.

Forexample,portgroup3wouldbespecifiedas3.0.

1 2 ... 335 336 337 338 339 340 341 342 343 344 345 ... 539 540

Comentários a estes Manuais

Sem comentários

Enterasys-networks D-Series Manual do Utilizador Página 340

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para Computador Enterasys-networks D-Series